Quick Curing Polyaspartic Floor Coating For Commercial And Industrial Settings
Quick Details Of Polyaspartic Floor Coating:
Polyaspartic coatings are renowned for their rapid curing times, typically hardening within 2 to 4 hours and allowing for light foot traffic on the same day, with full use possible within 24 hours. This is significantly faster compared to other floor coatings, such as epoxy, which takes 24 to 48 hours to cure for light use and up to 7 days for full curing, and polyurethane, which can take several days to fully cure. The quick curing time of polyaspartic coatings makes them highly advantageous for commercial and industrial settings where reducing downtime is essential.
Features Of Polyaspartic Floor Coating:
1. Offers a good balance between cost and performance
2. Contains antimicrobial agents to inhibit bacterial growth
3. Maintains clarity and appearance without yellowing
4. Easy to apply, clean and maintain
5. Naturally de-foaming with no ripples
6. Durable, high gloss, water resistant
Advantages Of Polyaspartic Floor Coating:
Polyaspartic flooring offers many advantages over other flooring systems. Its fast-curing properties make it possible to install and finish a floor in as little as one day, reducing downtime and improving productivity. It is highly durable and resistant to abrasion, chemicals, and UV rays, making it a long-lasting and low-maintenance flooring solution. Polyaspartic flooring can be customized with a variety of colors, patterns, and textures, providing endless design possibilities. It is also slip-resistant, improving safety in workplaces and homes. This flooring system is suitable for a variety of applications, including garages, showrooms, hospitals, schools, and even airplane hangars. With its combination of speed, durability, customization options, and low-maintenance features, polyaspartic flooring is a practical and stylish choice for both commercial and residential applications.
Product Descriptions Of Polyaspartic Floor Coating:
| Item |
Polyaspartic Resin(A) |
Hardener(B) |
| Appearance |
Liquid |
Liquid |
| Color |
Transparent |
Transparent |
| Viscosity@25ºC |
600-800 cps |
50-150 cps |
| Density, g/cm3 |
1.07±0.05 |
0.95±0.03 |
| Mix Ratio |
1:1 by weight |
| Hardness |
Shore, D75-80 |
| Pot Life |
30-40mins@25ºC |
| Curing Time |
8-12hrs@35ºC, 16-24hrs@25ºC
24hrs, Dry Completely
|
| Recoat Time |
2 Hrs |
| Thickness |
1-3 mm |
| Shelf Life |
12 Months |
| Application |
Industrial Use - Garages, Warehouses, Airports and hangars. Commercial Use - Shopping malls and boutiques, Hotels, Offices, Showrooms, Restaurants, Hospitals, Schools, Bar Tops, Table Tops. Residential Use - Entrances and hallways, basements, entertainment rooms, bathrooms, kitchens and living rooms.
|
Your message must be between 20-3,000 characters!
